Running out of fuel is not a rare scenario for a tractor owner. Many times, people forget to check the fuel gauge, and the tractor stops working in the middle of a field. Anyone who uses Kubota tractors should be aware of the tricks to start the engine after running out of fuel. Proper techniques are crucial at this point to prevent further damage to the engine.
Step 1: Refill the Fuel Tank
The first and most necessary step is to refill the fuel tank. Kubota tractors come equipped with a fuel filter that has a bleeder valve beside it. Open the bleeder valve and pump the fuel until bubbles stop appearing. Continue pumping until pure fuel starts to drip from the bleeder valve. Remember to refill the fuel tank before attempting to start the engine.
Step 2: Set the Throttle and Choke
Once the fuel tank is full, set the throttle to the full position and turn on the choke. Kubota tractors have a cold-starting aid, which is a specially designed device to help with starting the engine. Turning on the choke will create a richer fuel-air mixture, which can ignite quickly and help the engine start with ease.
Step 3: Preheat the Engine
Before you turn on the ignition, it's good to preheat the engine. Kubota tractors come with a glow plug that can help warm up the engine. Press and hold the glow plug for 10-15 seconds and then release. The plug helps to ignite the fuel-air mixture quickly and smoothly, so risking engine overheating can be avoided.
Step 4: Start the Engine
Once the engine has been primed and preheated, turn the ignition key and start the engine. Do not turn the key for too long as it can damage the starter motor. If the engine does not start within three to five seconds, wait for a minute, and repeat the process. Do not repeat the process for more than three times as it may harm the engine.
Conclusion
In conclusion, running out of fuel is not uncommon for a Kubota tractor owner. The essential steps mentioned above will help tractor owners start their engines and prevent any further damage. Always remember that following the correct techniques is crucial to keep the engine running smoothly and efficiently. Proper maintenance, including regular fuel checks, can help prevent the issue from happening in the first place.
"