how to load arrow trutac staple gun
Release time：2023-06-29 04:21:14
Page View：
author：Yuxuan
If you need to use a staple gun for home or DIY projects, then the Arrow TruTac Staple Gun is a great option. However, it can be frustrating to use if you don't know how to load it correctly. In this article, we will go step-by-step through the process of loading the Arrow TruTac Staple Gun.
Step 1: Remove any old staples
Before you can load your Arrow TruTac Staple Gun with new staples, you need to make sure there are no old staples left in the gun. To do this, simply hold the staple gun upside down over a waste bin and press the release button. Any old staples will fall out.Step 2: Open the staple chamber
Next, you need to open the staple chamber. To do this, grip the staple gun handle firmly in one hand and use your other hand to pull down on the silver metal tab at the bottom of the gun. This will release the front of the staple chamber and allow it to open up.Step 3: Insert staples
Now that the staple chamber is open, you can insert your new staples. Make sure you are using the correct size staples for your project. For the Arrow TruTac Staple Gun, you can use 1/4-inch to 9/16-inch staples. Place the staples in the chamber with the points facing down towards the metal plate.Step 4: Close the staple chamber
Once you have inserted your staples, you need to close the staple chamber. To do this, push the front of the staple chamber upwards until it clicks back into place.Step 5: Test the gun
Finally, before you use your Arrow TruTac Staple Gun, you should test it to make sure everything is working correctly. To do this, simply press the release button and tap the gun against a hard surface a few times. This will help to ensure that the staples are correctly loaded and that the staple gun is working properly.Conclusion
Loading the Arrow TruTac Staple Gun is a simple process that only takes a few minutes. By following these steps, you can ensure that your staple gun is loaded correctly and ready to use for your next DIY project. Remember to always use the correct size staples and to test the gun before use to avoid any potential issues. With these tips in mind, you can confidently tackle any DIY project with your Arrow TruTac Staple Gun.
