how to make a box scraper for a lawn tractor

Maintaining a lawn can be quite a challenging task, especially during the autumn season when the leaves start falling. A box scraper is an incredibly useful tool for taking care of lawn debris and creating a smooth surface for planting. However, purchasing one can be expensive. In this article, we will guide you through the process of making a box scraper for your lawn tractor, saving you money and providing an excellent solution for maintaining your lawn.

Materials Needed

To build a box scraper for your lawn tractor, you will need a few essential tools. You’ll need a welder and cutter, steel plates (2 pieces of 1/8 inch and 2 pieces of ¼ inch), a chain (10 feet long), a hitch pin, and a few fasteners.

Instructions

1. Begin by cutting a 1/8 inch steel plate into two long pieces, measuring 3 inches by 36 inches using a cutter. Next, mark two notches on each plate – one 2 inches long and another 6 inches long. 2. Use the cutter to create these notches, ensuring that they are far apart enough to accommodate a ¼ inch steel plate later on. 3. Cut the ¼ inch steel plate into two pieces, both measuring 6 inches by 36 inches. 4. Weld both the 1/8 inch steel pieces to the ¼ inch steel pieces, so the 1/8 inch plates make up the top part of the box scraper. The ¼ inch plates on either end serve as reinforcing pieces for the hitch, and the notches ensure they fit together correctly.5. Anchor the scraper blade with a length of steel channel (8 inches long by 1-inch square) down the center. 6. Roll up the chain and connect the ends to the blade and hitch with fasteners. 7. Lastly, attach the box scraper to your lawn tractor using a hitch pin.

Usage

The box scraper can be used for removing debris, leveling your lawn, and removing snow. Start the lawn tractor, attach the box scraper to it, and adjust its height from the ground for your needs. As you proceed, you’ll see the grass and debris accumulate in the box.

Maintenance Tips

To keep the box scraper in excellent condition, ensure that the cutting edge is sharpened regularly. Any strong abrasives, like rocks or tree stumps, may cause damage to the blade or other components. After each use, ensure that any debris or garbage is removed from the box, making sure that it is thoroughly washed and dried before storage.

Conclusion

There you have it! You should now have all the necessary information to create an affordable box scraper for your lawn tractor. It may be a bit time-consuming, but the finished product is worth it. Using this guide, you’ll save money, gain a valuable tool, and ensure that your lawn is always in pristine condition. Happy mowing!"