Tractors are very useful machines in agriculture and construction work. However, their productivity can be significantly enhanced by adding a toolbar. The toolbar is an implement that attaches to the tractor and helps to enhance its productivity. It comes in different sizes and shapes to fit different tractor sizes. In this article, we will discuss how to build a tractor toolbar that is suitable for small-sized tractors.
Materials Required
To build a tractor toolbar for a small-sized tractor, you will need the following materials:
- Two 3\"x4\"x1/4\" angle iron pieces
- Two 2\"x2\"x1/4\" angle iron pieces
- Two 1-1/4\" round pipes (6ft)
- Two 1-1/4\"x5\" nipples
- Two 1-1/4\"x6\" nipples
- One 1-1/2\"x5' square tube
- One 2\"x2\"x4\" square tube
- Two 1-1/4\" pipe clamps
- Two 1-1/4\" top hooks
- One 1-1/4\" discharge valve
- One 1-1/4\"x12\" nipple
- One 1-1/4\"x4\" nipple
- One 1-1/4\" tee
- One 1-1/4\" street elbow
- One 1-1/4\" elbow
- One 1-1/4\" nipple
- One 1-1/4\" ball valve
- One 1-1/4\" thread tee
- One 1-1/2\" thread tee
- One 1/4\" nipple
- One 1/4\" ball valve
- Two 3/8\"x4\" carriage bolts
- Two 3/8\" nuts
- Four 2-1/2\" pins
- Four 2-1/2\" hairpins
Step by Step Guide
Below is a guide on how to build the toolbar:
Step 1: Cut and shape metal pieces
Using a metal saw, cut the angle iron and square tube to the desired sizes. The lengths of the pieces will depend on the size of your tractor and implement. With a grinder, shape the edges of the pieces to remove burrs and sharp edges.
Step 2: Weld angle iron pieces
Weld the two 3\"x4\"x1/4\" angle iron pieces together to form the main frame of the toolbar. Also, weld the two 2\"x2\"x1/4\" angle iron pieces on the central section of the frame to form an angle.
Step 3: Add round pipes and nipples
Measure and place the round pipes on the frame and weld them in place. Attach the two 1-1/4\"x5\" nipples on both ends of the pipes. Then, attach the two 1-1/4\"x6\" nipples on the outside of the frame to form the hitch points. Finally, install the 1-1/4\" pipe clamps on the hitch points.
Step 4: Attach the Square tube
Slide the 1-1/2\"x5' square tube through the central section of the angle iron and weld it in place. Also, weld the 2\"x2\"x4\" square tube to the bottom of the central section. This is where the implement will attach.
Step 5: Install valves and fittings
Attach the 1-1/4\" discharge valve and the 1-1/4\"x12\" nipple to the main pipe. Also, attach the 1-1/4\"x4\" nipple, 1-1/4\" tee, 1-1/4\" elbow, and 1-1/4\" nipple. Install the 1-1/4\" ball valve on the end of the nipple and the 1-1/4\" thread tee on the other end. Also, install the 1-1/2\" thread tee on the central section.
Step 6: Secure the toolbar to the tractor
Using the two 3/8\"x4\" carriage bolts and nuts, attach the top hooks to the tractor's hitch points. Then, attach the toolbar to the top hooks using the four 2-1/2\" pins and hairpins.
Conclusion
Building a tractor toolbar may seem like a daunting task. However, with the right tools and materials, it can be an enjoyable and satisfying project. Moreover, the toolbar will significantly enhance the productivity of your tractor, making it more versatile in your agricultural and construction work. Follow the above steps, and you will have a durable and efficient toolbar!"
