how to disconnect a bush hog from tractor

Disconnecting a bush hog from a tractor may seem like a daunting task to new tractor owners. However, it is a fairly simple process that can be accomplished with the right equipment and knowledge. This article will provide a step-by-step guide on how to disconnect a bush hog from a tractor.

Gather Required Equipment

Before disconnecting the bush hog, you need to ensure that you have the required equipment. The most important item you will need is a bush hog disconnect tool. This tool will assist in disconnecting the driveline from the bush hog. In addition to this tool, you should also have gloves, a jack, and wheel chocks. These items will assist in ensuring that the bush hog disconnect process is carried out safely and efficiently.

Prepare the Tractor

To prepare the tractor for the disconnection process, ensure that the tractor engine and the bush hog are turned off. In addition, engage the parking brake and place wheel chocks in front of and behind one or both of the tractor's wheels that will remain on the ground. The wheel chocks will prevent the tractor from rolling away during the disconnection process.

Disconnect the Driveline

The next step is to disconnect the driveline from the bush hog. To do this, locate the driveline universal joint at the tractor end and slide the disconnect tool onto the driveline. Ensure that the tool is properly secured to the driveline by tightening the tool's holding screw. Once the disconnect tool is secured, you can begin to release the driveline by pulling the tool towards the bush hog until it clears the driveline's splined shaft.

Remove the Bush Hog

With the driveline disconnected, the final step is to remove the bush hog. To remove the bush hog, you will need to use a jack to lift the bush hog off the ground. Once the bush hog has been lifted, securely attach it to a trailer or place it on a block for storage. Ensure that the bush hog is adequately secured to prevent it from falling or causing harm.

Conclusion

Disconnecting a bush hog from a tractor is a relatively straightforward process that can be accomplished with the right equipment and knowledge. Always ensure that the tractor is properly prepared, and the equipment is safely secured before attempting to disconnect the bush hog. Following these steps will help ensure that the disconnection process is carried out safely, efficiently, and without any damage to the equipment.