how to make a tractor stick rake

Introduction to Tractor Stick Rake

A tractor stick rake is an incredibly useful tool for farmers as it allows them to clear land, remove debris, and prepare soil for planting. Typically, a tractor stick rake needs to be purchased from a farm equipment supplier, but it is possible to make one yourself with a little bit of know-how and some basic welding skills.

Tools and Supplies Needed

Before beginning to make your tractor stick rake, it is important to assemble the necessary tools and supplies. You will need:- Welding gloves and goggles - Welding machine - Measuring tape and ruler - Pen and paper - Angle iron - Flat bar steel - Steel mesh - Cutting torch

Building the Frame

The first step in building your tractor stick rake is to create the frame. Measure out the desired width and height of the rake using your measuring tape, ruler, and pen. Cut four lengths of angle iron to the appropriate width and weld them together to create a rectangular frame. Make sure to use plenty of heat to ensure the welds are secure.

Adding the Teeth

Next, you will need to add teeth to the frame. Cut flat bar steel into appropriate lengths and weld them onto the bottom of the angle iron frame at intervals of 6-8 inches. These teeth will dig into the soil and remove debris as you drag the rake behind your tractor.

Attaching the Mesh

To finish the tractor stick rake, you will need to attach steel mesh to the top of the frame. Cut the mesh to size and lay it on top of the frame. Weld it securely in place, making sure there are no gaps or loose areas. This will help prevent any debris from flying up and causing damage.

Conclusion

Creating a tractor stick rake is a great way to save money and customize your farming equipment to meet your specific needs. With a few basic tools and a bit of welding experience, you can build your own rake in no time. Remember to take all necessary safety precautions and enjoy the satisfaction of knowing you built an essential piece of farm equipment.