For customers in the agricultural industry, the Kubota tractor is a popular and reliable choice for heavy-duty work. One task that farmers and workers need to do is to float a bucket on the Kubota tractor. The process can be challenging for those who are not familiar with the equipment, but it is essential for farming and construction projects. This article will provide a step-by-step guide on how to float a bucket on the Kubota tractor, as well as some tips and recommendations to make the process easier and safer.
Step 1: Attach the bucket to the loader
The first step is to attach the bucket to the tractor's loader. Make sure that the loader is in the lowest position before you begin. Line up the pins on the bucket's frame with the loader's arms and insert them into place. Secure the locking mechanism to ensure that the bucket is attached firmly and will not come off during operation.
Step 2: Adjust the height of the loader
The next step is to adjust the height of the loader. Raise the loader to its highest position, making sure that the bucket is leveled. Check the bucket's alignment in relation to the tractor's frame. The bucket should be perpendicular to the ground and parallel to the tractor's axis. If necessary, adjust the height and level of the loader until you achieve the correct position.
Step 3: Adjust the float setting on the bucket
The bucket's float setting can be adjusted using the hydraulic control lever. The lever is usually located next to the tractor's seat. Move the lever to the float position to activate the float setting. The float setting allows the bucket to move up and down freely, following the contour of the ground. Adjust the speed of the lever to match the ground's slope, so the bucket will not float too quickly or too slowly.
Step 4: Use the bucket as needed
Once the bucket is floating correctly, you can start using it to carry materials and do other tasks. Move the loader lever forward to lift the bucket, and backward to lower it. Practice till you get comfortable with operating the loader and the bucket. Keep in mind that the operator needs to stop the float setting before raising the bucket to avoid damaging the tractor's hydraulic system.
Conclusion
Floating a bucket on a Kubota tractor is not difficult. However, it requires proper knowledge and practice to do it safely and efficiently. The four steps presented in this article can serve as a guide for those who need to float a bucket on the Kubota tractor. Keep in mind that these steps are not exhaustive, and operators need to follow other safety procedures when operating the equipment. Training and certification are also necessary to operate the tractor and other heavy machinery legally.