how to use rotavator with tractor

Rotavator is a farming implement used to plow and cultivate the soil in preparation for planting. The machine is attached to a tractor and consists of rotating blades that churn the soil, breaking it down and making it loose and ready for seeding. Rotavators are a great time and labour-saving tool for farmers and gardeners alike. However, it can be challenging to use the equipment, especially for those who are new to farming or have never used it before. In this article, we will discuss the steps involved in using a rotavator with a tractor.

Step 1 - Preparation

Before using a rotavator with a tractor, it is essential to prepare the field or garden. Remove any debris or large stones on the field as they may damage the machine's blades or cause it to malfunction. Depending on the type of rotavator, the soil must be softened or tilled to a specific depth. Measure the depth of soil required and mark it out using stakes or flags to ensure even plowing.

Step 2 - Connect the rotavator to the tractor

Attach the rotavator to the back of the tractor in the designated slot. Ensure that the machine sits at the same height as the tractor's drive shaft, and the power take-off shaft is in line with the tractor's drive shaft. Secure the rotavator to the tractor using locking pins or bolts. Connect the rotavator's hydraulic lines to the tractor's hydraulic system, which controls the machine's rotation and depth.

Step 3 - Adjust the machine

Adjust the rotavator's blades to the depth required using the hydraulic system, which should also control the speed and rotation of the blades. A slow speed is recommended for deep tilling, while a faster speed is suitable for lighter tilling or turning the soil.

Step 4 - Start the engine

Start the tractor engine and let it run for a few minutes before engaging the rotavator. Ensure that the engine is running at the required speed and that the gears are set to the appropriate forward or reverse speed. Slowly engage the rotavator while gradually increasing the machine's speed and movement. Avoid sudden movements or gear changes as this may damage the equipment or cause it to bounce uncontrollably.

Step 5 - Plow the field or garden

Drive the tractor forward, allowing the rotavator blades to churn the soil as they rotate. Slowly travel in straight lines and look ahead to ensure that you are not heading towards any obstacles. For best results, overlap each pass slightly to ensure thorough coverage of the field or garden area. Be sure to adjust the blade depth as needed to meet the requirements for the crop or garden being planted.

Conclusion

In conclusion, using a rotavator with a tractor can be a valuable tool for farmers and gardeners to prepare their lands for planting. However, it is essential to follow the manufacturer's instructions carefully and take precautions to avoid injury or equipment damage. Remember to keep the tractor in good working order and clean and maintain the rotavator after each use to prolong its lifespan. With proper usage, the rotavator can save time, labour and increase crop yields.