how to reset service light on kubota tractor

Kubota tractors are popular farming machines that serve small and large farm owners. The service light comes on every 50 hours after the last maintenance. However, sometimes the light may come on earlier after a few hours of use. The reason may be because of different factors, frequent use, or inactivity. There are many ways to reset the service light on Kubota tractors. In this article, we will discuss several methods you can use to get rid of the annoying service light.

Method 1: Using the Key

This method is quick and straightforward and requires less experience to accomplish. Here are the steps to use.

Step 1: Insert the key into the ignition and turn it to the On position, but not to the start position.

Step 2: Wait for 3 seconds to allow the warning light to go off, then press and hold the button on the dashboard until it flashes 3 times.

Step 3: Release the button and turn off the key.

Step 4: Restart the Kubota tractor to confirm the error light went off.

Method 2: Using the Control Panel

In this method, you will use the control panel to reset the service light. This option is more complex than the first method. Here are the steps:

Step 1: Toggle the switch button until the service light is OFF.

Step 2: Press and hold the toggle switch button while turning on the ignition.

Step 3. Wait for the service light to blink three times. Release the toggle switch.

Step 4. Turn off the ignition and wait for about 5 seconds.

Step 5. Restart the Kubota tractor to check whether the service light is off.

Method 3: Using the Service Menu

On modern Kubota tractors, you can use the service menu to reset the service light. Here is the process:

Step 1: Turn the ignition to the \"on\" position without starting the engine.

Step 2: Press the \"Enter\" button on the control pad to get to the service menu on the display screen.

Step 3: Scroll down to \"Reset Service\" on the screen.

Step 4: Confirm that you want to reset the service light.

Step 5: Turn off the ignition and wait a few seconds.

Step 6: Restart the Kubota tractor and ensure that the service light is off.

Common Problems and Solutions

Sometimes, after resetting the service light, it may light again after a few hours. The issue may be different depending on how you use your Kubota tractor. Common problems include;

1. Low oil pressure: Check the oil levels and ensure that it is above the minimum level.

2. Coolant level: Ensure the coolant level is within the recommended range by Kubota.

3. Clogged filters: Filter problems are common when the air and fuel filters are clogged. Clean or replace the filters as needed.

Conclusion

Resetting the service light on a Kubota tractor is a simple process that anyone can handle. There are different ways to get this done, and you can choose the best method depending on your tractor's model. If none of the above methods work, the problem may be more extensive. Contact a professional Kubota repair service to prevent severe damages.