how to bleed international tractor

International tractors are powerful machines that are designed to make farm work easier. They come in various models and sizes, and they are widely used all over the world. Just like any other mechanical equipment, these tractors require regular maintenance to keep them in good working order. One important aspect of maintenance is bleeding the tractor. Bleeding the tractor is a simple process that involves removing air from the hydraulic system to ensure that the system can work properly. This article will guide you on how to bleed an international tractor.

Gather the necessary tools

Before you begin bleeding your international tractor, you need to gather all the necessary tools. The tools you need for this task include a clean cloth, a wrench, a hydraulic fluid, and a container. The container is used to collect any fluid that may leak during the bleeding process. You should also ensure that you have enough hydraulic fluid to refill the system once you are done bleeding the tractor.

Locate the bleed valve

The next step is to locate the bleed valve. The bleed valve is usually located on the hydraulic cylinders or the pump. Look for a valve with a small nipple on top. Once you have located the valve, use the wrench to loosen it. Be careful not to damage the valve or the nipple during the process.

Bleed the system

After loosening the bleed valve, you need to turn on the tractor engine. The tractor should be running at a low idle speed. Next, move the hydraulic control levers back and forth for a few minutes. This will help to create pressure and remove any air bubbles in the hydraulic system. You should then check the fluid level in the hydraulic tank and add more fluid if necessary.Now, you need to monitor the bleed valve. Once you start seeing fluid coming out of the valve, you should tighten it gently. This indicates that all the air has been removed from the hydraulic system. Once you are done, turn off the tractor engine and refill the fluid tank to the right level.

Clean up and test

The final step is to clean up and test the tractor. Use the clean cloth to wipe any fluid spills or leaks. Then, start the tractor engine and check the hydraulic system to ensure that everything is working properly. Test the system’s functionality by using the hydraulic control levers to move the attachments, such as the plow or front-end loader. If everything is working well, then you have successfully bled your International tractor.

Conclusion

As you can see, bleeding an International tractor is a simple process that can easily be done by following these steps. Regularly bleeding the hydraulic system of your tractor will ensure that it is always in good working order and ready for use when you need it. Remember to always take care when working on machinery, and wear appropriate safety equipment to prevent injuries. By following these steps, you can keep your International tractor running smoothly for years to come.