how to prime ford tractor hydraulic pump

Ford tractors have been trusted farm machinery since the 20th century. These tractors always come with hydraulic power that allows the farmer to effortlessly operate different implements. However, if a farmer does not correctly maintain the hydraulic system, it can cause reduced productivity or even lead to irreversible damage. One of the most critical components to maintain is the hydraulic pump. In this article, we will outline four steps on how to prime a Ford tractor hydraulic pump.

Step 1 - Gather Supplies and Tools

Before starting the priming process, make sure you have the following supplies and tools:- Clean rags- Water or hydraulic oil- Pliers- Wrenches- Screwdrivers- Bucket- Funnel

Step 2 - Inspect the System for Leaks

Before priming the pump, it is important to check whether there are any leaks along the hydraulic lines. You can do this by wiping the lines, connectors, and other parts of the system with a clean rag to see if there is any sign of oil leakage. If leakage is detected, you will need to fix it before continuing with the priming process.

Step 3 - Fill the Pump with Oil/Fluid

The next step is to fill the pump with hydraulic oil or clean water. To do this, locate the oil/fill cap on the hydraulic pump and remove it. Using a funnel, fill the pump with oil or water until it is 3/4 full.

Step 4 - Remove the Pump's Air Bubble

Air pockets in the hydraulic system reduce the pump's efficiency. After filling the pump with oil, start the tractor and let it idle for a few minutes to allow the oil/water to circulate through the system and displace any air bubbles. While the tractor is still running, go back to the pump and remove the plug that allows air to escape. Keep the tractor running until you don't see any more bubbles escaping from the pump's air release plug.

Step 5 - Re-check the Hydraulic Fluid Level

After removing the air bubble, recheck the hydraulic fluid level. Add more fluid if necessary, but never overfill the pump.

Conclusion

Priming your Ford tractor hydraulic pump is a simple and essential maintenance process. Always make sure to inspect the system for leaks, fill the pump with clean oil/water, and remove the air bubble before re-checking the hydraulic fluid level. By following these four easy steps, you can keep your Ford tractor hydraulic pump operating at maximum efficiency and prolong the life of the entire hydraulic system. Remember to inspect and prime the pump regularly for the best outcome.