how does an oil pull tractor work
Release time：2023-09-20 20:39:43
Page View：
author：Yuxuan
An oil pull tractor is a type of tractor that works exclusively with oil as fuel instead of gasoline or diesel. Oil pull tractors were popular back in the early 1900s and were mainly used in agriculture. Today, these tractors have become collectors' items, but a few still exist, and they remain in use in some small farms. This article aims to explain the working mechanism of an oil pull tractor.
The Engine of an Oil Pull Tractor
The engine of an oil pull tractor is a two-stroke engine. Instead of using a carburetor, it has an oiler, which is responsible for regulating the amount of oil that enters the engine. The oiler is designed to mix oil into the fuel mixture, which is then fed into the engine. The oiler regulates the amount of oil that enters the engine to protect it from wear. The oiler also allows the engine to run for extended periods without overheating.The Transmission System
The transmission system of an oil pull tractor is relatively simple. It consists of a gearbox with two speeds that are achieved through the use of a clutch and a transmission lever. The clutch is located on the steering wheel and allows the operator to engage and disengage the gearbox easily. The transmission lever is located on the floor, and it allows the operator to switch between high and low gears.Power Take-Off (PTO)
An oil pull tractor has a power take-off system that is used to transfer power from the engine to the implements. The PTO is located at the rear of the tractor, and it is designed to be activated by a lever located on the right side of the operator's seat. Once the PTO is activated, the operator can attach various implements such as plows, cultivators, and hay balers.The Cooling System
The cooling system of an oil pull tractor is critical in ensuring that the engine does not overheat. The cooling system consists of a radiator located at the front of the tractor. The radiator is responsible for cooling the engine oil as it circulates through the engine block. The fan is used to pull air through the radiator and thereby lower the temperature of the oil and engine. The cooling system needs to be regularly checked to ensure that the engine is not overheated.Conclusion
In conclusion, An oil pull tractor is a fascinating piece of machinery that is still in use today despite being over a century old. The engine of an oil pull tractor, two-speed gearbox, PTO, and cooling system work together to ensure that it can handle various agricultural tasks. While it might seem outdated compared to more modern tractors, it is the simplicity of this tractor that makes it stand out. Its simplicity has allowed it to endure the test of time and continue on in its practical capacity in certain corners of the world.
