how to remove steering wheel on john deere lawn tractor

Steering wheels can become worn or damaged over time, and may need to be replaced. In some cases, it may be necessary to remove the steering wheel from the John Deere lawn tractor in order to gain access to other components. Removing the steering wheel is a fairly simple task that can be completed with just a few tools. In this tutorial, we will guide you through the steps necessary to remove the steering wheel on a John Deere lawn tractor.

Step 1: Preparation

Before removing the steering wheel, you will need to make sure you have the necessary tools. You will need a socket set with a 15/16-inch socket, a steering wheel puller, and a rag or towel. It is also helpful to have a helper to hold the steering wheel while you remove it. Once you have gathered your tools, turn off the engine and remove the key from the ignition.

Step 2: Removing the Cap

Start by removing the center cap from the steering wheel. This cap can be removed by prying it off with a small flathead screwdriver or by using a special cap removal tool. Be sure to set the cap aside in a safe place.

Step 3: Removing the Nut

Next, use the socket set to remove the nut that holds the steering wheel in place. This nut is located in the center of the steering wheel and is typically a 15/16-inch size. Place the socket onto the nut and turn it counterclockwise to loosen it. Once it is loose, you can remove it by hand.

Step 4: Using the Steering Wheel Puller

Now that the nut is removed, you can use the steering wheel puller to remove the steering wheel from the shaft. Place the puller over the shaft and attach the bolts to the holes on the back of the steering wheel. Tighten the bolts with a wrench until the steering wheel begins to loosen. Once it is loose, you can remove it by hand.

Step 5: Finishing Up

Once the steering wheel is removed, be sure to check the shaft and the components surrounding it for damage or wear. If anything looks damaged or worn, it may need to be replaced. If everything looks good, clean the area with a rag or towel and replace the center cap. You can now install your new steering wheel or access the components that needed to be reached.

Conclusion

Removing the steering wheel on a John Deere lawn tractor is a simple task that can be accomplished in just a few steps. By following the steps outlined in this tutorial, you can easily remove the steering wheel and access other components if necessary. With a little bit of time and effort, you can have your John Deere lawn tractor running smoothly again in no time.