how to put kubota tractor in 4 wheel drive

If you own a Kubota tractor, you may need to switch to four-wheel drive (4WD) to traverse rough terrain or carry heavy loads. The good news is that it's easy to put your Kubota tractor in 4WD if you know how. In this article, we will walk you through the step-by-step process of putting your Kubota tractor in 4WD.

Step 1: Prepare your tractor

Before putting your Kubota tractor in 4WD, ensure that the tractor's engine is turned off. Pull the parking brake to prevent your tractor from moving. If your tractor has a front loader, make sure it is lowered to the ground before continuing the process.

Step 2: Engage the clutch pedal

As you know, the clutch pedal is located on the left side of the operator's seat. Press down on the pedal with your foot and hold it there.

Step 3: Move the gear shift lever

Next, move the gear shift lever from neutral to first or second gear. It's essential to shift to these gears before engaging your Kubota tractor in 4WD.

Step 4: Engage 4WD

Find the 4WD selector lever, located below the gear shift lever. Push the lever forward to the 4WD position. If you have a Kubota tractor with an HST transmission, engage 4WD by pulling the lever towards you. Once you have shifted to 4WD, you should be ready to roll.

Tips on using your Kubota tractor in 4WD

When driving your Kubota tractor in 4WD, there are a few things to keep in mind. Firstly, avoid driving at high speeds. Driving too fast in 4WD can cause your tractor to tip over, resulting in severe injuries or damage to your equipment. Secondly, always use the correct gear for the job. Avoid shifting to too low or too high gear as it could damage your Kubota tractor's drivetrain.

Conclusion

Putting your Kubota tractor in 4WD may seem complicated at first, but it is a simple process. Make sure that you prepare your tractor before engaging 4WD. As you drive in 4WD, keep in mind the tips we have shared to ensure you use your Kubota tractor safely and efficiently.