how to put tractor tire chains on

Tractor tire chains are an essential accessory for any owner of a tractor or other heavy-duty agricultural equipment. These chains provide added traction and improve traction control, especially in harsh weather conditions. Putting them on, however, isn't as simple as just wrapping them around your tires. There's a process to follow, and in this article, we're going to run through some of the most important tips and steps to help you put your tractor tire chains on right the first time.

Step 1 - Preparation

Before you dive headfirst into putting tire chains on your tractor, you need to make sure you have everything you'll need. Start by checking your chains for damage, as any damaged chains could break once you start using them. Also, make sure you have the right chains for your tires. Check the size of your tires and compare them with the size of the chain. If the chains are too small, they will not fit, and if they're too big, they will likely fall off quickly.

Step 2 - Positioning the Chains

The next step is to position the chains on your tires. To do so, lay the chains out flat on the ground. Look for the section of the chain that has the fastener metal bars. Position this part of the chain at the bottom of your tire's sidewall, right up against the ground. Take the remaining sides of your tire chains and pull them up and around the top of your tire.

Step 3 - Attaching the Chains

Once you have your chains in position, the next step is to attach them. Starting with the fasteners on your tire's sidewall, take the fastener metal bars and connect them together tightly. Make sure the fit is as snug as possible. You may need to use a rubber mallet to tap the fasteners into position, as the process can be challenging.

Step 4 - Finishing Up

Once your chains are securely fastened, you can move onto the final step of finishing up. Begin by checking your chains to ensure they are tightly wrapped around your tires. Make sure they are evenly spaced, as uneven chains may make driving on them more challenging. To finish up, drive your tractor a short distance and check your chains again. This will allow you to ensure you have everything set up correctly before getting into any serious work.

Conclusion

Putting tractor tire chains on is a process, but with some patience and careful considerations, you can put them on correctly and get the most out of them. As with any new implement for your tractor, take your time and don't rush any of the steps. Ensure you have the right chains, the proper preparation, and take time positioning, attaching, and finishing the chains. These steps will allow you to enjoy the improved traction and traction control your tire chains provide, so take your time, do it right, and happy driving!