how to remove rear wheel on john deere lawn tractor

John Deere lawn tractors are popular equipment used to maintain beautiful lawns and gardens. These machines are designed to provide optimal mowing and trimming services. However, in order to perform maintenance and repairs, it may be necessary to remove the rear wheel. Removing your John Deere lawn tractor’s rear wheel might seem complicated at first glance, but it's actually a simple process that anyone can complete with the proper guidance. In this article, we will discuss how to remove the rear wheel on a John Deere lawn tractor.

Step 1: Preparation

Before removing the rear wheel on your John Deere lawn tractor, you need to prepare by gathering the necessary tools and equipment. You will need a socket wrench, axle stand, and a wooden block or something similar. Once you have your tools, park the tractor on a level surface and turn off the engine. Next, place the axle stand under the tractor and lift the tractor up to the point where both rear wheels are off the ground. This will help you access the rear wheel easily.

Step 2: Loosening the Wheel Nuts

With the tractor lifted, you can now start loosening the wheel nuts. Begin by removing the dust cover or cap located in the center of the wheel. This can be removed with a screwdriver. Once removed, use the socket wrench to loosen the wheel nuts. You may need a bit of extra strength to loosen them, especially if they're tightly screwed on. Remember, the nuts should be loosened in a counterclockwise direction.

Step 3: Removing the Rear Wheel

After loosening all the wheel nuts, you can now remove the wheel from the axle. While holding the wheel in place, gently pull it towards you to remove it from the axle. If the wheel feels tight, you can tap it from behind with a wooden block or something similar to loosen it. Once the wheel is free, carefully lower it onto the ground. You can now inspect and repair any issues with the wheel, including damage to the tire and axle.

Step 4: Replacing the Rear Wheel

Replacing the rear wheel is a simple process that involves reversing the procedure you used to remove it. First, lift the tractor back up, align the wheel onto the axle, and insert the wheel nuts. You can then tighten the wheel nuts using the socket wrench, ensuring that they're securely tightened. Finally, replace the dust cover or cap, and lower the tractor back to the ground.

Conclusion

Removing the rear wheel on a John Deere lawn tractor may seem a little overwhelming, but it's not a complicated process. With the correct tools and proper guidance, it can be a quick and easy task to complete. By following the simple steps outlined in this article, you can remove and replace your John Deere lawn tractor’s rear wheel with ease. Remember to always follow safety precautions, and if you're unsure about any steps, consult your owner's manual or professional mechanic.