how to change a tractor tire inner tube

Tractors are heavy-duty machines that require regular maintenance to keep them running in proper working condition. One of the essential parts of the tractor is the tire, and it is not uncommon to have a punctured tire or an inner tube. Changing the inner tube of a tractor tire can seem daunting, but it is a relatively simple process that can be done with the right tools and knowledge. This article will guide you through the steps on how to change a tractor tire inner tube.

Step 1: Remove the Wheel from the Tractor

The first step in changing a tractor tire's inner tube is to take off the wheel from the tractor. For this, you will need a jack, wrench, and a tire iron. Begin by loosening the bolts that secure the wheel on the tractor, but do not remove them yet. The jack should then be placed under the tractor's axle close to the wheel you want to remove. Use the jack to lift the tractor's tires off the ground and then take off the bolts and remove the wheel from the tractor.

Step 2: Remove the Tire from the Wheel Rim

With the wheel removed, the next step is to remove the tire from the wheel rim. You can do this by using a tire iron to pry open the edges of the tire. Once the tire is loose on one side, start working on the other side, pulling the tire off the rim. Be careful not to damage the tire sidewalls when prying off the tire.

Step 3: Replace the Inner Tube

With the tire removed, the old inner tube can now be taken out. The tire's sidewalls must first be removed from the rim such that the inner tube can be accessed. Gently deflate the tire, remove the old inner tube, and then take the new inner tube and put it in place. Make sure that the new inner tube is free of any twists or wrinkles. Inflate the tire slightly to give it a little shape, and then insert the tire back onto the wheel rim.

Step 4: Reassemble the Wheel and Tire

Once you have the new inner tube in place, reassemble the tire back onto the wheel rim. Start by fitting one side of the tire on the rim and then rolling the tire around the rim. Use your hands to push the outer edge of the tire toward the rim until the tire is securely in place. Finally, reinsert the bolts and tighten them with a wrench.

Step 5: Put the Wheel Back on the Tractor

The last step is to put the wheel back on the tractor. Lift the wheel and position it against the tractor's hub, then tighten the bolts and wheel lugs. Be sure to tighten the bolts and wheel lugs in a star pattern, which helps distribute the pressure evenly. Lower the tractor back onto the ground, remove the jack, and check that the tire is balanced.

Conclusion

In conclusion, changing a tractor tire's inner tube may seem intimidating, but it is a skill that can quickly be learned. By following the above steps, you can save yourself time and money by doing the maintenance work yourself. Regularly inspecting your tractor's tires for damage and punctures can help prevent such issues. Finally, always wear protective gloves and eyewear when working on your tractor to avoid any injuries.