how to attach wheels to chicken tractor

The Importance of Wheels on Your Chicken Tractor

If you're a backyard chicken farmer, you know how important it is to have a chicken tractor. Not only does it give your birds access to fresh air and grass, it also allows you to move them to a different spot so they can scratch up new ground and fertilize it with their manure.One of the keys to having an efficient chicken tractor is putting wheels on it. This makes it easy to move around and saves you from having to lift it every time you want to relocate.

Gather Your Supplies

Before you can attach wheels to your chicken tractor, you need to make sure you have all the necessary supplies. You'll need:- Four wheels (either purchased or salvaged from an old cart)- Four wheel axles- Four locking nuts- Eight washers- A drill- A metal cutting saw- A wrenchMake sure you have everything on hand before you start the project.

Mark and Measure the Spots for the Wheels

Once you have all the supplies, the first step is to mark and measure the spots where you'll attach the wheels. You want to make sure the wheels are evenly spaced and secure.Take the wheel axle and hold it up to the bottom of the tractor. Use a marker to make a spot where the axle will go through the metal frame. Repeat this process with each of the four wheels. Then, use a measuring tape to make sure the distance between each point is equal.

Drill Holes and Attach Wheels

Now that you have your spots marked, it's time to drill holes and attach the wheels to your chicken tractor.Using a drill bit that is slightly smaller than the diameter of your wheel axle, drill a hole where each mark is.Then, slide the wheel axle through the hole you just drilled. Place a washer on each end of the axle, and then use a locking nut to secure the axle in place.Repeat this process with each of the four wheels.

Test Your Work and Make Adjustments

Once you have all the wheels attached, it's time to test your work and make any necessary adjustments.Push your chicken tractor around to see how it moves. The wheels should turn freely and the tractor should be easy to move.If you run into any problems, such as a wheel that doesn't turn correctly, take the wheel off and check the axle to make sure it's straight and secure.

Conclusion

Attaching wheels to your chicken tractor is a relatively simple DIY project that can greatly improve your chicken farming experience. With the right supplies and some basic skills, you can have a fully mobile chicken tractor in no time.