how to remove bush hog from tractor

Bush hogs are an essential tool for farmers and homeowners alike. They are the perfect machines for cutting grass, weeds, and other vegetation in large areas. However, at some point, you will need to detach the bush hog from the tractor for transportation or storage. The process is rather simple, and in this article, we will discuss how to remove the bush hog from a tractor.

Gather Tools and Materials

Before starting the process of removing the bush hog, you need to make sure you have the necessary tools and materials. Some of the tools you may need include a socket wrench, a crescent wrench, a pair of pliers, a hammer and a block of wood. You may also need gloves and safety goggles. Once you have gathered everything you need, you can start to remove the bush hog.

Removing the Bush Hog

First, you need to park your tractor on a flat and level surface. Next, lower the bush hog to the ground. Then, remove the PTO driveline from the tractor by pulling out the spring-loaded locking pin. After that, you can remove the PTO driveline from the bush hog by sliding it off the PTO shaft. It's important to be careful when removing the driveline because it can be heavy and difficult to handle. Once you have removed the PTO driveline, you can now remove the bush hog from the three-point hitch of the tractor. To do this, look for the attachment pins that hold the bush hog to the tractor. Using a socket wrench, remove the retaining bolts from the three-point hitch. Usually, there are two bolts on either side of the hitch. Once you have removed all the bolts, use the tractor's hydraulics to lift the bush hog off the ground. You can then back the tractor away from the bush hog.

Cleaning and Maintenance

Now that you have removed the bush hog from the tractor, it's time to clean and maintain it. First, check the blades for any damage or dullness. If the blades are damaged or dull, they will need to be replaced before use. Next, inspect the driveline for any kinks, bends, or cracks. If the driveline is damaged, it's important to replace it before use as well. Lastly, clean the bush hog and remove any debris that may have accumulated.

Storage and Precautions

Once you have cleaned and maintained the bush hog, it's time to store it. You should store the bush hog in a dry and covered area. Make sure to keep it off the ground to avoid rusting. It's also important to lubricate all moving parts before storing. Additionally, you should take the necessary precautions when handling the bush hog. Always wear gloves and safety goggles when removing or installing the driveline. Having a block of wood handy can help you attach and detach the driveline safely. In conclusion, removing the bush hog from a tractor is a simple process that requires a few tools and materials. By following the steps outlined in this article, you can remove the bush hog with ease, clean and maintain it, and store it properly. Remember to take the necessary precautions to avoid injury and always inspect the bush hog before use.