how to put a tube in a tractor tire

Putting a tube in a tractor tire may seem like a daunting task, but with the right tools and some basic knowledge, it can be done easily. Tubes are necessary for tractor tires that have been punctured, and installing one can save you the cost of buying a new tire. In this article, we will guide you through the steps of putting a tube in a tractor tire.

Tools Required

Before you begin, gather all the necessary tools. You will need a tire iron, a tire gauge, a valve stem wrench, and a tube. Tire irons come in different lengths and shapes, so it's important to choose one that fits your tractor's tire size. A tire gauge will help you measure the tire's pressure and ensure that it's properly inflated. A valve stem wrench is needed to remove the old valve stem from the tire. Finally, the tube should be the right size and thickness for your tractor tire.

Removing the Tire

The first step in putting a tube in a tractor tire is to remove the tire from the wheel. To do this, use the tire iron to pry the tire away from the rim. Start at the tire's sidewall and work your way around, using the tire iron to push the tire bead over the rim. Repeat this process on the other side until the tire is completely off the wheel. Be careful not to damage the tire or the rim.

Installing the Tube

Once the tire is off the wheel, it's time to install the tube. Begin by inflating the tube slightly to give it some shape. Then, place the tube inside the tire. Make sure that the valve stem is in the hole in the rim, and that the tube is centered inside the tire. Now, use the tire iron to work the tire bead over the rim, being careful not to pinch or damage the tube. Repeat this process on the other side of the tire until it's completely on the wheel.

Inflating the Tire

After the tire is on the wheel, it's time to inflate it. Use the valve stem wrench to tighten the valve stem onto the rim. Then, use the tire gauge to check the tire pressure. Inflate the tire to the recommended pressure, which is usually printed on the side of the tire. Finally, check the tire for leaks by applying soapy water to the valve stem, tire bead, and sidewall. If there are any leaks, fix them before using the tractor.

Conclusion

Putting a tube in a tractor tire is a simple process that can save you time and money. With the tools and knowledge outlined in this article, you can easily install a tube in your tractor's tire and get back to work. Remember to take your time, be careful not to damage the tire or tube, and always check the tire pressure before using your tractor.