how to load a savage 110

The Savage 110 is a high-quality bolt-action rifle that is designed to withstand a lot of wear and tear. One of the most important things about owning a Savage 110 is knowing how to properly load it. In this article, we will guide you through the process of loading a Savage 110 rifle.

Step 1: Safety First

Before loading your Savage 110 rifle, it is essential to make sure the gun is unloaded. Double check by opening the bolt and visually inspecting the chamber to ensure it is empty. Once you have confirmed the rifle is unloaded, you may begin to load it.

Step 2: Preparing the Rifle for Loading

Start by closing the bolt and pulling the trigger. This will allow the rifle to be in its most receptive state for loading. Next, take the magazine and insert it into the bottom of the rifle. Make sure the magazine is securely attached and that the latch is properly seated.

Step 3: Loading the Magazine

The Savage 110 rifle is unique in that it loads from the top rather than the bottom. With the magazine securely attached to the rifle, start loading the ammunition from the top. Gently insert the round and push it down into the magazine. Repeat this process until the magazine is full or until you have the desired amount of ammunition loaded.

Step 4: Chambering a Round

Once the magazine is loaded, pull back the bolt and allow it to slide forward. The bolt will pick up a round from the magazine and load it into the chamber. Ensure that the bolt has been locked down before firing the rifle.

Conclusion

With these simple steps, you can properly load your Savage 110 rifle with ease. Remember to always put safety first and double-check that your rifle is unloaded before beginning the process of loading it. With proper care, your Savage 110 rifle will provide you with years of accurate and reliable shooting.