how to replace seal on samsung front load washer

Replacing the seal on a Samsung front load washer is not a difficult task. It may seem daunting at first, but with the right tools and some patience, anyone can do it. A damaged or worn-out seal will cause leakage and affects the machine's performance. In this article, we will guide you on how to replace the seal on your Samsung front load washer in simple steps.

Step 1: Prepare for the Job

Before you start working on your washer, make sure you have all the necessary tools and replacement parts. You will need a new seal, a screwdriver, pliers, detergent, and a clean cloth. Furthermore, ensure that you have turned off the power from the socket.

Step 2: Remove the Front Panel

The first step is to remove the front panel from the machine. With the help of a screwdriver, unscrew the screws situated in the front of the washer. After that, remove the screws from the soap dispenser and the control panel to access and detach them from the front panel. Remove the wires attached to the door lock and keep them aside safely.

Step 3: Access the Seal

Now it's time to access the seal. With the help of pliers, remove the seal clamp at the front of the washer. After that, pull the seal and detach it from the drum. You will need to apply some force to remove it completely.

Step 4: Replace the Seal

After the old seal is removed, it's time to install the new one. Ensure that the new seal is installed correctly. Place the new seal carefully into the same slot on the drum where the old seal was situated. Make sure it is straight and not twisted. Once it is correctly positioned, replace the clamps on the seal and ensure it is secure.

Step 5: Put Everything Back Together

Now it's time to put everything back together. Re-attach the door lock wires, control panel, and soap dispenser. Secure the front panel back to the machine using the screws. Once everything is secure, switch on the power and run a test cycle to see if there are any leaks.

Conclusion

Replacing a seal on your Samsung front load washer is not a difficult task. It is essential to replace the seal as soon as you find out it's damaged or worn-out to prevent further damage to the machine. Following the steps outlined above, you'll have your washer in top shape in no time!"