Cleaning the Filter on Your LG Top Load Washer
Do you find that your LG top load washer is not running as smoothly as it used to? This might be due to a clogged filter. The filter on your washer plays an essential role in preventing large items from entering the washing machine's internal plumbing and causing damage. Therefore, it's essential to clean it regularly. In this guide, we will walk you through the steps required to clean the filter on your LG top load washer effectively.
Step 1: Turn Off the Power
Before you begin cleaning the filter, you need to turn off the power to your LG top load washer. This step is crucial as it will ensure your safety while working on the machine. To turn off the power, unplug the washer from the power outlet or turn off the circuit breaker from the electrical panel.
Step 2: Locate the Filter
The second step is to locate the filter on your LG top load washer. You can find it at the bottom of the machine behind a small access panel. The access panel is located on the bottom left or right-hand side of the washer, depending on the model. Using a screwdriver, remove the screws that hold the access panel in place and pull the panel away from the washer.
Step 3: Remove the Filter
After removing the access panel, you can see the filter. The next step is to remove the filter to clean it. To do this, gently twist and pull the filter out of its housing. If the filter is difficult to remove, use pliers to help you grip it. Once you have removed the filter, place it on a flat surface, and inspect it for any debris or buildup.
Step 4: Clean the Filter
The fourth step is to clean the filter thoroughly. Start by removing any visible debris or buildup from the filter using a soft-bristled brush. Next, rinse the filter under running water to remove any remaining debris. If the filter is heavily clogged, you may need to use a toothbrush to scrub it gently. Avoid using abrasive cleaners or bleach, as this could damage the filter.
Step 5: Reinstall the Filter and Access Panel
Once you have finished cleaning the filter, the final step is to reinstall it and the access panel. Start by placing the filter back into its housing and twisting it back into place. Next, replace the access panel by aligning it with the slots and pushing it into place until you hear it click. Finish by tightening the screws to secure the panel in place.
By following these simple steps regularly, you can keep your LG top load washer running smoothly and prevent costly repairs. Remember to clean the filter at least once a month or more frequently if you have pets or wash heavily soiled items.
"