how to load yashica mat 124g

The Yashica Mat 124G is a classic medium format film camera that produces high-quality images. Loading film into the camera can be tricky for first time users. In this article, we’ll guide you through the process of loading film into the Yashica Mat 124G step-by-step.

Step 1: Gather Supplies

Before begin loading the film, make sure you have all the necessary supplies. You will need a roll of medium format film (120 or 220), scissors, and a dark room or changing bag. The changing bag will allow you to load the film without exposing it to light.

Step 2: Open the Camera

To open the camera, slide the latch located on the side of the camera. The back of the camera will pop open, revealing the film compartment.

Step 3: Load the Film

Take the roll of film and thread it through the film advance sprocket located on the left side of the camera. Pull the film across to the right side of the camera and insert it into the empty take-up spool. Make sure the film is properly seated in the spool.

Step 4: Close the Camera

Once the film is loaded, close the camera back by pressing down on the latch until it clicks into place. Then, advance the film by turning the film advance knob on the top of the camera until the first frame is visible in the film counter window.

Step 5: Check the Film Advance

Finally, advance the film to the first frame by turning the film advance knob until it stops. Make sure the film is advancing correctly by looking through the opened back of the camera. You should see the sprockets pulling the film across the back of the camera and onto the take-up spool.

Conclusion

Loading film into a Yashica Mat 124G may take some practice, but with patience and care you can master the technique. Remember to keep the film away from light at all times, and take care not to damage the film in the process. Once you have loaded your film, you are ready to start taking beautiful medium format photographs with your Yashica Mat 124G.