If you're dealing with a LG top load washing machine that has a drainage issue, it can be quite frustrating and time-consuming to diagnose the problem and fix it. Fortunately, there are several steps you can take to fix the issue and drain water from your LG top load washing machine on your own without having to call in a professional. In this article, we will provide a step-by-step guide for draining water from an LG top load washing machine.
Step 1: Turn off the Power
The first step is to ensure that the washing machine is not connected to any electrical outlet. Switch off the power supply to avoid any chances of electrocution. You can unplug the washer from the wall outlet, or if it's hardwired, shut off power to the machine from the circuit breaker.
Step 2: Remove the Drain Hose
Locate the drain hose at the back of the washing machine and remove it from the drain pipe. The hose is typically secured by a clip, clamp or screw, so you may need to use pliers or a screwdriver to loosen and remove it. Be sure to place a towel or bucket under the hose to catch any water that may spill out.
Step 3: Clean the Drain Hose and Pump
Once the drain hose is detached, check for any debris that might be clogging it. Use a long flexible brush or a pipe cleaner to clear any blockage. Afterward, inspect the pump that the hose was connected to. Use a flashlight to look inside the pump and remove any debris or foreign objects with a pair of pliers or tweezers.
Step 4: Test the Drain Pump
Now it's time to test the drain pump. To do this, you'll need to put the washing machine into a drain cycle. Turn the machine on then set it to the spin or drain cycle. If the pump is functioning correctly, you should hear a sound similar to a faint humming or vibrating. If you hear any strange noises, it may indicate a faulty pump that needs to be replaced.
Step 5: Reinstall the Drain Hose
Once you've cleaned and tested the pump and hose, it's time to reconnect the drain hose to the pump and secure it with a clamp or clip. Make sure the hose is properly attached and tightened to avoid any leaks. Once everything is secure, run a quick cycle of the washing machine to ensure that the drain function is working properly.
Conclusion
Draining water from an LG top load washing machine is not a complicated process, but it does require some basic tools and a little patience. By following these simple steps, you can diagnose and fix drain problems on your own without having to call a professional. Remember that safety is equally important, so always disconnect the power source and wear gloves to avoid getting injured. With these tips, you'll be able to use your LG top load washing machine without any drainage problems.
"