how to tighten spring loaded hinges

Spring loaded hinges are commonly used in doors, cabinets, and other types of furniture. Over time, these hinges may become loose and may not work as efficiently as before. Tightening spring loaded hinges may seem like a daunting task but it is really quite simple. This article will provide you with the necessary steps to tighten your spring loaded hinges.

Step 1: Remove the Hinge

The first step to tightening a spring loaded hinge is to remove it from the door or cabinet. Use a screwdriver to remove the screws that hold the hinge in place. Be sure to keep the screws in a safe place so that they are not lost.

Step 2: Tighten the Spring Tension

Once you have removed the hinge, you can now adjust the spring tension. Find the spring adjustment screw and turn it clockwise to increase the tension. If you want to decrease the tension, turn the screw counterclockwise. It is important to take note of the original position of the spring tension before adjusting it.

Step 3: Reinstall the Hinge

After adjusting the spring tension, it is time to reinstall the hinge. Put the hinge back in its original position and align the screw holes. Insert the screws back into the holes and tighten them using a screwdriver.

Step 4: Test the Hinge

Once the hinge is installed, test it to see if the tension has been properly adjusted. Open the door or cabinet to the desired angle and check if the door stays in place without moving or sagging. If the hinge is still loose, repeat the steps described above.

Conclusion

Tightening spring loaded hinges is a simple process that can be done without the help of a professional. With these easy steps, you can have your hinges working as efficiently as before in no time. Remember to take note of the original position of the spring tension before making any adjustments. This will help you make the necessary adjustments without causing any damage to the hinge.