how to replace tub bearing on lg front load washer

Front load washers have become increasingly popular over the years due to their energy efficiency and cleaning ability. LG front load washers are among the most popular brands in the market today. However, like all appliances, LG front load washers can break down over time. One of the most common issues is a faulty tub bearing. In this article, we will discuss how to replace tub bearing on LG front load washer.

Tools and materials needed for the task

Before we dive into the steps to replace tub bearing on LG front load washer, it is essential to gather all the tools and materials that you will need to complete the job. These include:-Pliers-Screwdrivers-Hammer-socket set-Tub bearing kit-A new gasket-Cleaning supplies

Step-by-Step Guide to Replacing Tub Bearing

The following are the steps to follow when replacing the tub bearing on LG front load washer:1. Safety first:Ensure that you have disconnected the power supply to the washer before starting the repair process.2. Remove the washer front panel:Use a screwdriver to remove the screws that hold the front panel in place. Once the screws are out, gently lift the panel away from the machine.3. Remove the washer drum:After removing the front panel, carefully remove the washing drum from the washer unit. This may require some force, but be sure not to damage any components.4. Detach the tub bearing:Using pliers, remove the tub bearing from the drum. Ensure that you remove all the attached parts such as washers and screws.5. Clean the drum:Clean the drum using a suitable cleaning solution. This will ensure that there is no dirt or debris left behind.6.Replace the tub bearing:Now you can place the new tub bearing in position. Follow the instructions provided in the tub bearing kit to ensure that all parts are fixed correctly.7. Replace the gasketReplace the old gasket with a new one to ensure a water-resistant seal.8. Replace the drum:Put the drum back in place and ensure that all straps and screws are tightly secured.9. Reattach the front panel:Put back the front panel, ensuring that all screws are in place.10. Test the machine:Plug the washer back in and run a test cycle to ensure that everything is working correctly.

Conclusion

Replacing the tub bearing on an LG front load washer may seem like a daunting task but following these simple steps can make it simpler. Remember to take all the necessary safety precautions and have all the tools and equipment you need at hand before beginning the repair process. With a little bit of effort, you'll have your washer up and running again in no time!"