how to load a grease tube into a grease gun

Grease guns are important tools for lubricating machines and equipments. They are designed to hold and apply grease to specific parts to reduce moving friction and prolong the life of the machines. One important aspect of using grease guns is to know how to load a grease tube. This article will provide a step-by-step guide on how to load a grease tube into a grease gun.

Step 1: Choose the Right Grease Tube

Before loading the grease tube, it is important to choose the right type of grease that your machine requires. The type of grease will typically depend on the temperature, load capacity, and speed of the machine. Once you have identified the right grease type, select a grease tube that matches the volume capacity of your grease gun.

Step 2: Release the Pressure on the Grease Gun

To avoid accidents, it’s important to release the pressure on the grease gun before loading a new grease tube. This can be done by unscrewing the head of the grease gun and pushing the piston back inside the cylinder. Make sure you do this cautiously to prevent the residual grease from squirting out of the nozzle.

Step 3: Remove the Old Grease Tube

Next, remove the old grease tube from the grease gun by twisting or unscrewing the bottom of the gun to detach it from the cylinder. Carefully pull the old grease tube out of the gun. If you find that grease is still remaining in the tube, you can transfer it to the new tube by squeezing it out.

Step 4: Insert the New Grease Tube

Take the new grease tube and remove the cap at the end of the tube. Now, insert the new tube into the cylinder of the grease gun by twisting it in a clockwise direction. Ensure that the bottom of the gun stays detached while you are doing this.

Step 5: Secure the Grease Tube and Prime the Grease Gun

Once the new grease tube is inserted, firmly screw the bottom of the grease gun back to the cylinder. Prime the grease gun by slowly pumping the handle until the grease reaches the nozzle. Check to ensure that grease is being dispensed from the nozzle before using the grease gun on your machine.

Conclusion

Loading a grease tube into a grease gun is a simple process that requires a few minutes to complete. It’s important to choose the right type of grease, release the pressure before loading, remove the old grease tube, insert the new grease tube, secure it and prime the grease gun before use. By following these steps, you can guarantee your machine will be properly lubricated and function efficiently.