how to load scotch packaging tape

Scotch packaging tape, commonly known as Sellotape, is a must-have product in every household. It is used for wrapping gifts, sealing packages, and attaching posters. But, loading the tape can be a tricky task. In this article, we will guide you on how to load Scotch packaging tape with ease.

Gather the materials

To begin, you'll need to gather the necessary materials. You will need a dispenser, which can be purchased at any stationery store or online. The dispenser comes in different shapes and sizes, but they all function the same way. The dispenser holds the tape roll and helps you dispense the tape easily. You'll also need a new roll of Scotch packaging tape to load into the dispenser.

Unpack and prepare the tape roll

Before you start loading the tape, remove any packaging from the tape roll. Place the roll on a flat surface and find the loose end of the tape. Gently pull the end of the tape towards you until there is about an inch of tape hanging off the roll.

Load the tape

Now that you have your dispenser and tape ready, you can start loading the tape. Open the dispenser by pressing the button or pulling the tab on the side. Locate the spool in the center of the dispenser. The spool is the cylindrical piece that the tape roll will sit on. Insert the tape roll on the spool. Make sure it sits snugly on the spool and that the free end of the tape is not stuck to the roll.Once the tape roll is loaded, you can start to feed the tape through the dispenser. Pull the free end of the tape through the guide slot on the underside of the dispenser. This guide slot will help keep the tape in place as you pull out the required length.

Test and Use the dispenser

To test if the tape has been loaded correctly, pull out a small amount of tape and cut it using the dispenser's built-in cutter. If the tape comes out smoothly, you're ready to start using the dispenser. Attach the dispenser to the package or gift you want to wrap. Pull out the required length and use scissors to cut the tape.

Conclusion

In conclusion, loading a Scotch packaging tape dispenser is an easy task. By following the steps outlined above, you can load your dispenser in just a few minutes. Once loaded, you can use the dispenser with ease and speed. Now you're ready for your next gift-wrapping or packaging project.