how to clean drain on samsung front load washer

As an inevitable part of our daily routine, washing clothes can never go wrong with the use of a front load washer. However, one thing that can cause problems in the long run is the presence of a blocked drain. Blockages in the drain can cause lots of unnecessary issues that can lead to costly repairs if not taken care of on time. In this article, we will explain the steps required to clean the drain on a Samsung front load washer so that you can maintain your washer in top condition for longer.

Step 1: Preparation

Before you start the process of cleaning your Samsung front load washer drain, you need to prepare certain tools and materials. You will need a few towels or cloths to prevent water spills, a pair of rubber gloves, a bucket, a flashlight, and a small brush or toothbrush. Once you have all the necessary equipment, it's time to move on to the next step.

Step 2: Locate the Drain Filter

The next step is to find the drain filter located in the lower front panel of your Samsung front load washer. To access it, you need to remove the panel by twisting the filter knob counter-clockwise. Once you have removed the panel, you will see a black hose and a plastic cap attached to it.

Step 3: Disconnect the Drain Hose

After locating the drain filter, the next step is to disconnect the drain hose. You can do this by removing the plastic cap and then removing the drain hose from the filter attachment. Ensure that you have a bucket nearby to catch any water that may drain out from the hose.

Step 4: Clean the Drain Filter

Now it's time to clean the drain filter. Remove the debris and dirt from the filter using a brush or toothbrush. However, if the debris and dirt are hard to clean, you can use warm water to loosen them up. After cleaning the filter, ensure that it's completely dry before reattaching it to the filter attachment.

Step 5: Reassemble the Washer

The final step is to reassemble the Samsung front load washer. Ensure that you reattach the drain hose and the plastic cap to the filter attachment. Also, make sure that you screw the filter knob back in place. Once you have reassembled the washer, turn it on to ensure that it's working correctly.

Conclusion

By following these simple steps, you can ensure that your Samsung front load washer drain is cleaned efficiently to prevent blocked drains, which can cause costly repairs. Moreover, it's essential to repeat the cleaning process at least once every six months to maintain your washer in good working condition. Remember, prevention is better than cure, so it's better to clean the drain filter regularly than to wait for problems to build up.