Home > loader > where to load paper in canon pixma

where to load paper in canon pixma

Release time:2023-06-29 16:16:20 Page View: author:Yuxuan

The Basics of Canon Pixma Paper Loading

Canon Pixma printers are popular for their high-quality printing capabilities, reliability, and user-friendliness. However, if you're using this printer for the first time, knowing where to load paper can be a challenge. This article will help you understand the basics of paper loading in Canon Pixma printers.

1. Opening the Paper Input Tray

Before loading paper into your Canon Pixma printer, you need to open the paper input tray. First, locate the input tray, which is usually located at the front of the printer. Gently pull the paper input tray towards you to open it. You should hear a click sound to indicate that the tray is locked in the open position.

2. Adjusting the Paper Guides

After you've opened the paper input tray, adjust the paper guides to fit the size of the paper you plan to use. The guides should be snug against the sides of the paper without bending it. If you're using A4 paper, for example, adjust the guides to fit the length of the A4 paper. The guides are usually marked with paper size labels to make it easier.

3. Loading Paper into the Printer

Once you've adjusted the paper guides, load the paper into the printer. Make sure the print side of the paper is facing down. Align the paper so that it's between the paper guides and push it gently until it stops. Avoid overloading the printer with too much paper, as this might cause paper jams or other issues.

4. Closing the Paper Input Tray

After you've loaded the paper into the printer, close the paper input tray by pushing it back towards the printer. You should hear a click sound to indicate that the tray is locked in place. Don't push the tray too hard as this might damage it.

5. Loading Specialty Paper

Besides regular paper, you can also print on specialty paper using Canon Pixma printers. To load specialty paper, such as photo paper or cardstock, open the paper output tray. Then, slide out the paper support at the bottom of the tray. Load the specialty paper with the print side facing down. Align the edges of the paper with the paper guides and gently push it in until it stops. You should hear a beep sound to indicate that the printer has recognized the paper.

Conclusion

Loading paper into Canon Pixma printers might seem daunting, but it's a simple process once you get the hang of it. Remember to always adjust the paper guides to fit your paper size, load paper with the print side facing down, and avoid overloading the printer. Follow these simple steps, and you'll be able to print professional-quality documents and photos in no time.
THE END

Not satisfied with the results?