how to adjust load leveling hitch

As a trailer owner, having a load leveling hitch is essential for safe and comfortable towing experience. With proper installation and adjustment of a load leveling hitch, you can ensure your trailer stays level with your towing vehicle and prevent dangerous swaying while driving. In this article, we will guide you through the steps on how to adjust a load leveling hitch.

Step 1: Measure the Height

Before adjusting your load leveling hitch, you should know the height of your vehicle and the trailer. Measure the height of your towing vehicle from the ground to the top of the hitch receiver. Then, measure the height from the ground to the bottom of your trailer hitch. The difference between the two measurements is the amount that needs to be adjusted. This step is crucial as having an improper adjustment can lead to an unstable and dangerous towing experience.

Step 2: Adjust the Hitch

Now, we can begin adjusting the hitch. Loosen the bolts on the hitch head and slide it up or down depending on how much adjustment is needed. Tighten the bolts, making sure the hitch head is secure. Remember, the key here is to have the vehicle and trailer level when hitched together. Adjusting the hitch too high or too low can cause the trailer to sway or bounce while driving, which is extremely dangerous.

Step 3: Adjust the Chains and Spring Bars

Once the hitch is adjusted correctly, you can adjust the chains and spring bars. The chains should be tightened enough so that they are straight, but not too tight as it can lift the rear of the vehicle and cause instability. The spring bars should be adjusted so that they apply enough pressure to the hitch ball, but not too much where they cause too much friction. You may need to experiment with the tension until you find the perfect balance.

Step 4: Test the Hitch

Now that you have adjusted your load leveling hitch, it’s time to test it out. Take your vehicle and trailer for a short drive, paying attention to any swaying or bouncing. If you feel any unstable movements while driving, you may need to readjust your hitch until you find the perfect balance.

Conclusion

Adjusting a load leveling hitch can seem like a daunting task, but it’s crucial for a safe and secure towing experience. Remember to measure the height of your vehicle and trailer, adjust the hitch head, chains, and spring bars, and test it out before hitting the road. If you’re unsure about anything, consult a professional or refer to the hitch installation manual for further guidance. Happy and safe towing!"