how to balance front load washer on pedestal

Having a front-loading washer on a pedestal can save you a lot of back strain. Unfortunately, it can be challenging to balance your machine on the pedestal. When you install the washer on the pedestal, it must be levelled to prevent it from shaking, jumping, and eventually breaking down. In this article, we'll discuss how to balance a front-load washer on a pedestal.

Step 1: Prepare the Pedestal

Before installing the washer on the pedestal, ensure that the pedestal is sturdy, safe, and in good shape. Check for cracks, damages, and stability. Make sure the pedestal is fixed to the floor or the wall and levelled. Look for any loose screws and tighten them.

Step 2: Remove Transport Bolts and Spring

Many washers are shipped with transport bolts and springs to prevent damage during transportation. These bolts keep the washer drum stable, but they can damage the machine if they're not removed before using it. To remove the transport bolts, open the washer door, locate the bolts at the back of the machine, and unscrew them with a wrench. Also, remove any tape, plastic, or foam padding that was used to secure the machine inside the box.

Step 3: Adjust the Feet

Most front-loading washers have adjustable legs or feet. These adjustors can be raised or lowered to level the machine on the pedestal. Use a level to check if the machine is balanced. If one side is higher, adjust the feet or legs until the machine is levelled. Check the level again, and repeat the adjustments until the machine is stable.

Step 4: Test the Machine

Once you've levelled the machine on the pedestal, it's time to test it. Run a cycle with a small load to see if the machine vibrates, rocks, or shakes. If the machine is stable, then you're done. If the machine is unstable, check if the feet or legs are uneven, adjust them, and try again. Sometimes, vibration could be due to an uneven load, too many clothes, or the type of surface.

Conclusion

A front-loading washer on a pedestal can make your life easier, but only if it's installed correctly. Balancing the machine on the pedestal is an essential step that prevents damage, saves energy, and extends the life of your washing machine. By following these four steps, you can ensure that your front-loading washer will run smoothly and quietly for years to come.