how to take apart a kenmore front load washing machine
Release time:2023-06-29 12:29:24
Page View:
author:Yuxuan
Kenmore is a famous brand of home appliances known for producing high-quality washing machines. However, over time, these machines are likely to develop faults that may require you to take them apart. This article guides you on how to take apart a Kenmore front load washing machine in order to locate and fix the problem.
Safety Tips
Before you start disassembling your Kenmore washing machine, ensure you follow some safety tips. These include unplugging the washing machine from the power source, wearing safety gloves, and draining any remaining water from the machine. You should also have all the necessary tools handy, including a Phillips head screwdriver, a pair of pliers, and a wrench. Removing the Front Panel
To access the inside of your Kenmore front load washing machine, you need to remove the front panel. Start by locating the screws holding the panel in place. These screws are usually at the bottom of the panel. You may need to use a flashlight to locate them. Once you’ve found the screws, use the screwdriver to remove them. After removing the screws, pull the front panel gently towards you. Taking apart the Pump and Motor
Once you’ve removed the front panel, you will have access to the pump and motor assembly. Observe how these two components are connected and take a picture for future reference. Disconnect all the wires connecting the pump and motor to the washing machine. You may need to use your pliers to do this. After disconnecting the wires, remove the bolts that are holding the pump and motor in place. Once you’ve removed the bolts, gently pull out the pump and motor assembly. Disassembling the Drum
To access the drum, first remove the retaining ring located on the front of the drum. You can do this by using a flat screwdriver. After removing the retaining ring, pull out the seal from around the drum. You should then be able to remove the drum from the washing machine. Be careful not to damage the drum or the bearings. Once you've removed the drum, you can then locate the source of the problem and take the necessary corrective measures.Conclusion
In conclusion, taking apart a Kenmore front load washing machine is not a difficult task if you have the right tools and follow the safety tips are outlined in this article. However, if you are not sure of what you are doing, it is advisable to hire an experienced technician to do the job for you. Proper maintenance is crucial, and regular inspection of your washing machine can prevent damages that may require you to take apart your washing machine.