how to load a pistol grip tape dispenser

Pistol grip tape dispensers are particularly useful in packaging and wrapping products. These dispensers feature a pistol grip handle that makes the application of tape easier to handle. However, some people may encounter difficulty in loading the dispenser. This article provides a step-by-step guide on how to load a pistol grip tape dispenser.

Step 1: Prepare your tape dispenser and tape roll

The first step in loading a pistol grip tape dispenser is to gather the materials you need. You will need a pistol grip tape dispenser and a roll of packaging tape. Make sure the dispenser is in good condition, free from wear and tear. Also, ensure that the tape roll is compatible with the dispenser. Manufacturers usually specify the compatible tape size on the dispenser.

Step 2: Open the dispenser

The next step is to open the dispenser. Flip the dispenser over so that the front plate is facing down. You will notice two plates on the dispenser that are held together by screws. Use a Phillips head screwdriver to unscrew the screws and remove the back plate. Be careful not to lose the screws.

Step 3: Insert the tape roll into the dispenser

With the back plate removed, you can now insert the tape roll into the dispenser. Position the tape roll so that the tape is facing the dispenser's front plate. The end of the tape should be sticking out from the dispenser's opening. Then, press the back of the tape roll against the back plate, making sure it fits snugly.

Step 4: Replace the back plate

Once the tape roll is in place, you can now replace the back plate. Position the back plate onto the dispenser, making sure that the tape is still sticking out from the opening. Then, align the screw holes and use the Phillips head screwdriver to tighten the screws. Make sure the screws are tight enough to hold the dispenser's plates together.

Step 5: Test the tape dispenser

After completing the previous steps, you are now ready to test the dispenser. Pull the end of the tape out from the dispenser's opening, and then place the dispenser on an even surface. Hold the pistol grip handle and pull the tape dispenser away from the surface. The tape should come out smoothly and without any issue. If the tape fails to come out smoothly, then you should follow the previous steps again.

Conclusion

In conclusion, loading a pistol grip tape dispenser may seem daunting at first, but it is a relatively simple process that can be done quickly with a bit of practice. It is essential to follow the steps as outlined above to ensure that you load the dispenser correctly. With practice, loading a pistol grip tape dispenser will become second nature, and you can ship your products with ease.