how to stop a front loader washing machine from moving

Front loader washing machines are becoming more and more popular due to their efficiency and water-saving properties. However, one of the issues that users often face is the machine moving around during the spin cycle. This not only causes inconvenience but also poses a safety risk. In this article, we will discuss some tips and tricks to stop a front loader washing machine from moving.

Leveling the Machine

The first and most important step to stop a front loader washing machine from moving is to ensure that it is level. If the machine is not level, it will rock back and forth during the spin cycle, causing it to move around. To level the machine, you need to adjust the feet on the bottom of the machine. You can use a spirit level to check if the machine is level or not. Once you have determined which foot needs adjusting, use a spanner or pliers to turn the foot clockwise or counterclockwise until it is level. Repeat this process for all the feet until the machine is level.

Reducing the Load

Another reason why a front loader washing machine may move around during the spin cycle is because of the load being too heavy. If you overload the machine, it will cause it to become unbalanced, which will result in it moving around. To avoid this, try to reduce the load and spread it evenly throughout the drum. If you have a large load, it is best to split it into smaller loads and wash them separately. This will not only stop the machine from moving but also extend the life of the machine.

Using Anti-Vibration Pads

If leveling the machine and reducing the load does not help, you can try using anti-vibration pads. These pads are designed to absorb the vibrations caused by the washing machine during the spin cycle. You can purchase these pads from any hardware store or online. To install them, simply place the pads underneath the feet of the washing machine. Make sure that the machine is level before installing the pads. This will ensure that the pads are effective in stopping the machine from moving.

Tightening the Transit Bolts

If you have recently purchased a front loader washing machine, it may still have the transit bolts attached to it. These bolts are used to keep the drum in place during transportation. If you do not remove them before using the machine, they may cause it to move around during the spin cycle. To remove them, locate the transit bolt holes on the back of the machine. Use a wrench or spanner to turn the bolts counterclockwise to remove them. Once you have removed all the bolts, store them in a safe place. If you have lost the bolts, you can purchase them from the manufacturer.

Conclusion

In conclusion, a front loader washing machine moving around during the spin cycle can be a frustrating and dangerous problem. However, by following the tips and tricks outlined in this article, you can stop the machine from moving and ensure that it operates smoothly and safely. Remember to always level the machine, reduce the load, use anti-vibration pads, and remove the transit bolts if necessary. With these simple steps, you can keep your front loader washing machine in top condition for years to come.