how to enable load and go dispenser

If you've ever struggled with bulky detergent bottles, you know that laundry can be a hassle. That's where load and go dispensers come in. These dispensers take the guesswork out of laundry by automatically adding detergent to your wash load. In this article, we'll explain how to enable load and go dispensers, so you can make laundry day a breeze.

Step One: Check Your Washer

Before you can enable a load and go dispenser, you'll need to make sure your washing machine is compatible. Load and go dispensers are available on select models of Whirlpool, Maytag, and Amana washers. Check your washer's manual or do a quick internet search to see if your model is compatible.

Step Two: Install the Cartridge

Once you've confirmed that your washer is compatible with a load and go dispenser, it's time to install the cartridge. The cartridge should come with your washer, but replacement cartridges can be purchased separately. To install the cartridge, follow these steps:1. Open the washer's lid or door.2. Locate the dispenser compartment on the top left side of the washer.3. Slide the cartridge into the dispenser compartment until it clicks into place.4. Close the lid or door.

Step Three: Fill the Cartridge

After the cartridge is installed, you'll need to fill it with detergent. To do this, follow these steps:1. Pull out the drawer below the load and go dispenser.2. Fill the drawer with liquid detergent, following the manufacturer's recommended amount for your load size.3. Slowly pour the detergent from the drawer into the load and go dispenser. 4. Close the drawer.

Step Four: Enable the Dispenser

With the cartridge installed and filled, you're ready to enable the load and go dispenser. To do this, follow these steps:1. Press the \"Load and Go\" button on your washer's control panel. 2. Select the number of loads you want the dispenser to be enabled for. 3. Press the \"Start\" button to save your settings.

Conclusion

With a load and go dispenser, laundry day can be a lot less stressful. By following these simple steps, you can enable your dispenser in just a few minutes. Just remember to check your washer's compatibility, install the cartridge, fill it with detergent, and enable the dispenser. With these steps completed, you'll be ready to enjoy a hassle-free laundry experience.