how to drain kenmore elite front load washer
Release time：2023-06-20 21:04:10
Page View：
author：Yuxuan
Introduction
If you own a Kenmore Elite front-load washer, you may have encountered the issue of water pooling in the drum or not draining completely. This can not only be a nuisance but can also lead to mold, mildew, and musty odors. In this article, we will guide you through the steps on how to drain your Kenmore Elite front-load washer. Step 1: Turn off the power
Before attempting to drain the washer, make sure that it is turned off and unplugged. This will ensure your safety when handling the machine and prevent any electrical damage. Step 2: Locate the drain hose
The next step is to locate the drain hose. In most Kenmore Elite front-load washers, the drain hose is located at the back of the machine. It is usually attached to the drain pump and can be identified by its shape and size. Step 3: Prepare a container
Once you have located the drain hose, prepare a container to collect the water. This can be a bucket, a large bowl, or any other container that is large enough to hold the water. Place the container near the drain hose. Step 4: Remove the drain hose
Using a pair of pliers, loosen the clamp that secures the drain hose to the drain pump. Once the clamp is loose, gently pull the drain hose away from the pump. Be prepared for some water to spill out when you remove the hose. Step 5: Drain the water
Direct the end of the drain hose into the container you prepared earlier. The water should start flowing out of the hose and into the container. Let the water drain completely until there is no more left in the drum. Step 6: Reattach the drain hose
Once the water has drained, reattach the drain hose to the drain pump by tightening the clamp with your pliers. Make sure that the hose is securely attached to the pump to prevent any leaks. Conclusion
In conclusion, draining a Kenmore Elite front-load washer is a simple task that can be done in a few easy steps. With the right tools and preparation, you can easily drain any excess water from your washer and prevent mold and mildew growth. Remember to turn off the power and unplug the machine before attempting to drain it, and always use caution when handling any electrical appliances.
