Kenmore front load washers can be a great addition to any home, providing clean clothes with minimal hassle. However, like any washing machine, they can experience drainage problems that can make laundry day a headache. If you're experiencing issues with your Kenmore front load washer's drainage, don't immediately assume you need to call in a professional. With a little bit of know-how, you can troubleshoot and resolve the problem yourself. In this article, we'll guide you through the steps you need to take to drain your Kenmore front load washer effectively.
Step One: Check the Drain Hose
The first step you should take when you experience drainage issues with your Kenmore front load washer is to check the drain hose. Over time, the hose may become clogged with debris or tangled up, preventing water from draining out of the machine. Turn off your washer and remove the hose from the wall and the back of the machine. Inspect the hose for any signs of damage, such as cracks or rips. If you spot any issues, you'll need to replace the hose. If there's no damage, check for any blockages by running a small amount of water through the hose. If the water doesn't flow through freely, you'll need to clear the blockage.
Step Two: Clear Any Blockages
To clear a blockage in your Kenmore front load washer's drain hose, you'll need to disconnect the hose from both ends and remove the clog. You can do this by using a long, thin tool like a pipe cleaner or a wire hanger. Slowly insert the tool into the hose and carefully push it through the clog until the blockage is removed. Once you've cleared the clog, reattach the hose and test the machine to see if it's draining properly.
Step Three: Check the Drain Pump
If clearing the drain hose doesn't resolve your Kenmore front load washer's drainage problem, the issue may lie with the drain pump. The drain pump is responsible for pushing water out of the machine, so if it's malfunctioning, your washer won't drain properly. To check the pump, first, turn off the washer and disconnect the drain hose. Next, locate the drain pump near the bottom of the machine, and inspect it for any signs of damage, such as cracks or leaks. If you spot any damage, you'll need to replace the pump. If there's no damage, check for any blockages by running a small amount of water through the pump. If the water doesn't flow through freely, you'll need to clear the blockage.
Step Four: Replace the Drain Pump
If the drain hose and pump are both functioning correctly and you're still experiencing drainage problems with your Kenmore front load washer, you may need to replace the drain pump. First, order a new pump online or from your local appliance store. Next, turn off your washer and disconnect the drain hose. Locate the drain pump and disconnect it from the machine. Replace the old pump with the new one and reattach the drain hose. Test the machine to see if the new pump resolved the drainage problem.
Conclusion
Dealing with drainage issues on your Kenmore front load washer can be frustrating, but with the right information and tools, you can troubleshoot and resolve the problem quickly. Be sure to regularly check your machine's drain hose and pump for any signs of damage or clogs, and don't be afraid to replace parts when necessary. By following the steps outlined in this article, you can get your Kenmore front load washer back up and running in no time.
"