how to load scotch double sided tape dispenser

If you have recently purchased a Scotch double-sided tape dispenser, you might be wondering how to load it properly. It is essential to know how to load the dispenser to avoid any frustrating moments or wasted tape. In this guide, we will take you through the process of loading a Scotch double-sided tape dispenser.

Gather the Required Materials

The first step in loading the Scotch double-sided tape dispenser is to gather the necessary materials. You will need a new roll of Scotch double-sided tape, the tape dispenser, and a clean surface to work on. Make sure the surface is dry and clean to prevent any dust or debris from attaching to the tape.

Preparing the Tape Dispenser

To prepare the Scotch double-sided tape dispenser, you need to open its cover. Most tape dispensers have a cover on the top that is easily pulled off. If you are unsure how to open the cover, refer to the instructions that came with the dispenser. Some dispensers also have a button or lever on the side that you need to push or pull to release the cover.Once the cover is off, you should see a plastic spindle inside the dispenser. The spindle is usually located in the center and may have a mechanism that allows you to rotate it manually. You need to remove the old roll of tape from the spindle before you can load the new one.

Load the Tape Roll onto the Spindle

The next step is to load the new roll of Scotch double-sided tape onto the spindle. Take the new roll and insert it onto the spindle. Make sure the adhesive side faces down, and the loose end of the tape is facing the dispenser's cutting edge.After inserting the roll of tape, thread the loose end through the cutting edge of the dispenser. Pull enough tape through the cutting edge to make sure it doesn't retract once you close the dispenser's cover. Also, make sure there is not any slack between the roll and the cutting edge.

Closing the Dispenser

After threading the tape, you can now close the Scotch double-sided tape dispenser. Ensure that the cover is securely attached to avoid any mishaps. Pull out a small strip of tape to test if the dispenser is functioning correctly. If the tape comes out smoothly and evenly, you have successfully loaded your Scotch double-sided tape dispenser.

Conclusion

In conclusion, loading a Scotch double-sided tape dispenser is a simple process that shouldn't give you any trouble. The most crucial part of the process is following the correct order to ensure that the dispenser works correctly. With this guide, you should now have a better understanding of how to load your dispenser and start getting creative with double-sided tape.