how to load a ryobi string trimmer

Loading a Ryobi string trimmer might seem like a daunting task at first, but with the right tools and some patience, it can be a simple and quick process. String trimmers are essential tools for maintaining a neat and tidy lawn, and knowing how to load the string properly can make your trimming experience more efficient.

Gather Your Tools

Before you begin loading your Ryobi string trimmer, you will need a few tools to help you. First, you will need to gather the correct type of trimmer line. Ryobi trimmers typically require a 0.080-inch diameter string, but double-check your owner's manual to be sure. You will also need scissors or a cutting tool to trim the line to the correct length. Finally, you will need gloves to protect your hands while working with the line.

Preparation Steps

To begin loading your Ryobi string trimmer, first, make sure the trimmer is off and that the battery is disconnected to prevent any accidental starts. Next, remove any old string from the spool and carefully clean any debris or dust from the spool and trimming head. Then, locate the center hole on the spool and insert the string into the hole, pulling it through until it is even on both sides.

String Loading

Once you have prepared your spool, it's time to load the string. Cut two pieces of string, each around 9-10 feet long. Insert one end of one of the pieces of string into the small hole located on the top of the spool. Wind the string in the direction indicated by the arrow on the spool, making sure to keep the line tight as you wind it. Leave around 6 inches of un-wound string on the spool and repeat the process with the second piece of string.

Finishing the Load

Once both sides of the spool are wound with string, thread the remaining inches of string through the holes on the spool's trimmer head and carefully replace the spool into the trimmer head. Make sure the line is securely in place and that the head is locked in position. Then, give the trimmer line a test by turning on the Ryobi trimmer and running it at low speed. If the line appears to be feeding correctly, you are ready to get to work!

Conclusion

Loading a Ryobi string trimmer might seem challenging at first, but with the correct tools and steps, it can be a straightforward process. Properly loading your trimmer will not only make your trimming experience more efficient but also prolong the life of your Ryobi string trimmer. Remember to always take caution when working with tools and read your owner's manual to ensure you are loading the string correctly.