how to load motex mx 5500 price gun

Motex MX 5500 price gun is a very useful tool in any retail business. It is a labeling machine that can print labels containing price, batch number, and other information. It is very easy to use, but first, you need to know how to load the price gun. This article will guide you on how to load Motex MX 5500 price gun.

Step 1: Gather Supplies

Before you start loading the price gun, you need to make sure you have all the necessary supplies. You will need the following:

• Price gun
• Labels
• Ink roller

Make sure you have the right labels and ink roller that are compatible with the price gun.

Step 2: Load the Labels

To load the labels, you need to follow the steps below:

1. Open the cover of the label compartment on the price gun by pushing the release button.
2. Insert the roll of labels into the compartment, with the label facing down and the edge facing the dispenser.
3. Pull the label strip towards the front of the price gun until it is aligned with the dispenser.
4. Cut the end of the label strip using the cutter located at the back of the price gun.
5. Cut the end of the backing paper using the cutter located at the side of the price gun.
6. Close the cover of the label compartment by pushing it down until it clicks into place.

Step 3: Load the Ink Roller

To load the ink roller, you need to follow the steps below:

1. Remove the cover of the ink roller compartment located at the side of the price gun.
2. Insert the ink roller into the compartment, with the gear facing down towards the label exit.
3. Press the ink roller down until it snaps into place.
4. Replace the cover of the ink roller compartment by pushing it until it clicks into place.

Step 4: Test the Price Gun

After loading the labels and ink roller, you need to test the price gun to make sure it is working properly.

1. Turn the price gun over and press the trigger to print a label.
2. Check the label to see if the print is clear and the information is correct.
3. If the print is not clear or the information is incorrect, you may need to adjust the printing head or the ink roller.

Conclusion

Loading the Motex MX 5500 price gun is a simple process that can be done in a few minutes. By following the steps above, you can ensure that the price gun works properly and is ready to use in your retail business. Remember to use the right labels and ink roller that are compatible with the price gun to get the best results.