how to remove agitator from amana top load washer

Removing an agitator from an Amana top load washer may seem like a daunting task, especially if you have never done it before. However, with the right tools and a few easy steps, you can do it yourself in no time. This article will guide you through the process of removing the agitator from your Amana top load washer.

Tools Needed

Before you start removing the agitator, you will need a few tools. These include a socket wrench, an extension bar, a flathead screwdriver, and a hammer. Make sure you have all these tools at hand before you start.

Step-by-Step Guide

Here are the steps you need to follow to remove the agitator from your Amana top load washer:

Step 1: Turn off your washing machine and disconnect it from the power source to avoid any accidental electrocution.

Step 2: Open the lid of the washing machine and remove any clothes or items that may be inside.

Step 3: Locate the agitator inside the washing machine. It may be covered by a plastic cap or a fabric softener dispenser. If there is a plastic cap, remove it by using a flathead screwdriver to pry it off. If there is a fabric softener dispenser, remove it by pulling it straight up.

Step 4: Underneath the cap or dispenser, you will see a bolt. Use a socket wrench and an extension bar to remove the bolt by turning it counterclockwise.

Step 5: Once you have removed the bolt, gently pull the agitator straight up. If it is stuck, you can tap the sides of the agitator with a hammer to loosen it.

Step 6: Congratulations! You have successfully removed the agitator from your Amana top load washer.

Conclusion

Removing the agitator from your Amana top load washer is simple and straightforward if you have the right tools and follow the steps outlined above. It is a good idea to clean the agitator and the inside of the washer before replacing the agitator. If you are not sure about any of the steps or encounter any problems, it is best to consult a professional.