how to replace belt on lg front load washer

LG front load washers are popular for their high efficiency and convenient features, but even the most reliable appliances need maintenance and repairs over time. One common issue with front load washers is a broken or worn out belt, which can cause the machine to stop washing or spinning properly. In this article, we will provide step-by-step instructions on how to replace a belt on an LG front load washer, so you can get your machine up and running again.

Gather Supplies

Before you begin the repair process, you'll need to gather a few supplies. Make sure you have a replacement belt that matches the model of your LG washer – you can order one online or purchase it from a hardware store. You'll also need a Phillips head screwdriver, a flat head screwdriver, a pair of pliers, and a putty knife. Additionally, it's a good idea to wear gloves to protect your hands during the repair process.

Remove Access Panel and Belt

To access the belt, you will need to remove the back access panel of the washer. Start by unplugging the machine from the electrical outlet and turning off the water supply valves. Locate the screws on the back panel and use your Phillips head screwdriver to remove them. Once the screws are out, carefully pull the panel away from the machine.With the access panel off, you should be able to see the motor and the belt. Use your pliers to release the belt from the motor shaft and the pulley. If the belt is still in good condition, you can simply remove it and put the new one in its place. If the belt is broken or worn out, you will need to use a putty knife to scrape away any remaining bits of the old belt.

Install the New Belt

Once you have removed the old belt, it's time to install the new one. Begin by wrapping the belt around the motor shaft and then around the pulley. Use your pliers to hold the belt in place while you use your other hand to slowly turn the motor shaft. This will help the belt slide into place. Once the belt is securely in place, give it a gentle pull to make sure it's correctly tensioned.

Replace the Access Panel and Test the Machine

Finally, it's time to replace the back access panel of the LG washer. Carefully line up the panel with the machine and reattach the screws with your Phillips head screwdriver. Once the panel is securely in place, plug the machine back in and turn on the water supply valves. Test the washer by running a cycle to make sure that it's working properly. Congratulations – you have successfully replaced the belt on your LG front load washer!

Conclusion

Replacing a belt on an LG front load washer may seem intimidating, but with the right tools and a little patience, it's a repair that you can do yourself. Be sure to follow these step-by-step instructions carefully and take care to ensure your safety throughout the process. With your newly replaced belt, you can enjoy your properly functioning LG washer for years to come.