how to clean filter on maytag front load washer

Introduction

Maytag front loading washer is one of the most reliable washing machines available on the market today. It is widely used in households and commercial laundries alike. The purpose of the filter in the Maytag front load washer is to catch any debris that might be in the washing machine. Over time, this filter can become clogged, which can affect the washer's performance. In this article, we will discuss how to clean the filter on Maytag front load washer.

Preparation

Before you begin the process of cleaning the filter on your Maytag front load washer, there are a few things that you need to prepare. First, you will need to unplug the machine to prevent any mishaps. Next, you will need a container to collect the water that will drain out of the washer when you remove the filter. You should also gather a few towels and have them ready to clean any spillages.

Cleaning the Filter

1. Locate the filter: The filter on the Maytag front load washer is located at the bottom of the machine behind a small door. 2. Open the filter compartment: Using a flathead screwdriver or something similar, push out the clip on the door then pull the door open. 3. Catch any water: Place a container beneath the filter compartment to catch any water that may spill out when you remove the filter. 4. Remove the filter: Turn the filter counterclockwise to loosen it, then pull it out of the washer. 5. Clean the filter: Rinse the filter under running water. You can use an old toothbrush to clean the surface debris and then rinse it out again until it's clean.6. Replace the filter: Once the filter is clean, push it back into the washer and turn it clockwise until it locks into place, then close the filter compartment door.

Reassembling the Washer

After cleaning the filter, it's important to ensure that the washer is reassembled correctly. 1. Check for any spillages: Wipe up any water that may have spilled out during the cleaning process.2. Close the filter door: Push the filter door firmly until it clicks shut.3. Plug the machine back in: Reconnect the power cord to the electrical socket.

Conclusion

Cleaning the filter on your Maytag front load washer is a simple task that you should perform at least once a month to keep the machine running efficiently. The process should take no more than five minutes, and with regular cleaning, you can extend the life of your washing machine. Maintaining the filter is just one part of the routine maintenance required to keep your Maytag front load washer working correctly. Ensuring that you maintain the filter and follow the manufacturer's instructions will result in a cleaner and better-performing washer.