how to load film into kodak m35

Kodak M35 is a popular film camera that is very easy to use. However, if you are a beginner, you may face some difficulties while loading the film. In this article, we will guide you step by step on how to load film into Kodak M35.

Step 1: Open the camera back

The first step is to open the camera back. You can do this by pulling up on the rewind knob on the top left of the camera. Once you have done that, the back of the camera will pop open. Be careful not to force it open, as this can cause damage to the camera.

Step 2: Load the film

Next, you need to load the film. Take the film canister and insert it into the left-hand side of the camera. The film leader should be facing you and the film canister should be positioned so that it drops into the slot on the left.

Step 3: Pull the film leader across

After you have inserted the film canister, you will need to pull the film leader across the camera and feed it into the take-up spool on the right-hand side of the camera. Make sure that the film leader is tight enough to prevent it from slipping out of the spool.

Step 4: Wind the film

Once you have fed the film leader into the take-up spool, you can start winding the film. Turn the advance lever clockwise until the first frame is visible in the film counter window on the top right of the camera. This indicates that you have loaded the film correctly.

Conclusion

Loading film into Kodak M35 is a simple process that requires a few steps. By following the steps outlined above, you can load film without any hassle. Remember, practice makes perfect. The more you load film into the camera, the easier it will become. Enjoy your new photography journey with Kodak M35!"