how to load a packing tape roller

Packing tape is a commonly used item in every household or workplace. It comes in handy when you need to seal boxes, envelopes, or packages. However, it can be frustrating when you need to load your packing tape roller, especially if it's your first time doing it. Fear not, as this article will guide you step-by-step on how to load your packing tape roller.

Step 1: Remove the empty spindle

Before you start loading your packing tape roller, you need to first remove the empty spindle from the holder. The spindle is the round plastic mechanism that holds the tape in the roller. To do this, simply pull the spindle out of the holder. Some packing tape rollers have a lock mechanism, so make sure you release the lock before pulling out the spindle.After removing the spindle, make sure to dispose of the old tape cartridge properly. You can recycle it or throw it away, but remember to handle it with care as it may still have some adhesive left on it.

Step 2: Insert the new tape cartridge

Now, it's time to insert the new tape cartridge into the holder. Get your new tape cartridge and insert it into the holder. Make sure the end of the tape is facing downward so that it can stick to the surface you're taping more easily. Push the cartridge in until it clicks into place.

Step 3: Thread the tape through the roller

Once the cartridge is in place, it's time to thread the tape through the roller. Pull the end of the tape out of the cartridge and thread it through the roller. The roller is the round metal or plastic part that the tape passes through before it comes out of the holder. Simply thread the tape through the roller until it comes out on the other side.Make sure you pull the tape out enough so that it hangs down loosely. This way, you can easily find the end of the tape the next time you need to use it.

Step 4: Attach the spindle back onto the holder

Once the tape is threaded through the roller, it's time to attach the spindle back onto the holder. Grab the spindle and insert it back into the holder. Make sure it clicks into place, and if there is a lock mechanism, make sure to snap the lock shut.Now your packing tape roller is loaded and ready to use! Give it a quick test run to make sure the tape is coming out smoothly and evenly.

Conclusion

Loading a packing tape roller may seem daunting at first, but it's actually a simple process once you know the steps. Remember to dispose of the old tape cartridge properly, insert the new cartridge correctly, thread the tape through the roller, and attach the spindle back onto the holder. With these easy-to-follow steps, you'll be able to load your packing tape roller like a pro in no time!"