Home > loader > how to load a 10 22 magazine

how to load a 10 22 magazine

Release time:2023-06-29 00:55:47 Page View: author:Yuxuan

The 10 22 magazine is an essential component of the Ruger 10 22 rifle, and without it, the rifle is useless. However, loading the magazine can be a bit challenging, especially for beginners, which is why we have prepared this guide to help you master the art of loading a 10 22 magazine. In this article, we will walk you through the step-by-step process of loading a 10 22 magazine quickly and efficiently.

Step 1: Gather Your Ammunition

The first step to loading a 10 22 magazine is to gather all the ammunition you will need. Make sure you have the correct caliber ammunition that matches your rifle, and ensure that the ammunition is in good condition. Also, ensure that you have enough rounds to fill your 10 22 magazine fully. Generally, a standard 10 22 magazine can hold ten rounds, but some high-capacity magazines can hold up to 25 rounds.

Step 2: Prepare the Magazine

Before you can load your 10 22 magazine, you need to prepare it by first unlocking and removing the spring and follower. This step is essential to ensure that the magazine is clean, free from debris, and can insert and extract the rounds smoothly. So, push down the magazine follower and slide the magazine latch to the right to release the magazine. Once the magazine is free, you can easily remove the spring and follower from the magazine and wipe clean any dirt or debris.

Step 3: Load the Magazine

After preparing the magazine, you can now proceed to load it with the ammunition you have gathered. Start by inserting the first round into the magazine with the bullet end facing the front of the magazine. Once the first round is seated in the magazine, push it down towards the spring using your thumb. Insert the second round on top of the first one, then repeat the process until you have loaded the desired number of rounds. Remember to keep pushing down the rounds with your thumb as you insert them to ensure they align well with the follower.

Step 4: Reassemble the Magazine and Load it into the Rifle

After loading the magazine, reassemble it and insert it back into the rifle by sliding the magazine into the receiver until it clicks into place. Then, pull the charging handle to the rear to ensure that the first round is chambered. Now, you are ready to start shooting.

Conclusion

Learning how to load a 10 22 magazine is crucial for any Ruger 10 22 rifle owner as it makes the rifle more efficient and effective. By following the steps outlined in this article, you can load your magazine quickly and reliably, ensuring that your rifle is always ready when you need it. So, gather your ammunition, prepare your magazine, load it, reassemble it, and load it into the rifle, and you are ready to start shooting.

"
THE END

Not satisfied with the results?