how to load avery 1131

As a business owner, the Avery 1131 label gun can be a useful tool for pricing and organizing inventory. However, loading the gun with labels can be confusing for those who are not familiar with the process. This article will provide step-by-step instructions on how to load the Avery 1131 label gun.

Step 1: Gather Supplies

Before starting, gather all necessary supplies. You will need the Avery 1131 label gun, labels, and tweezers. It is important to use the correct labels for the label gun to prevent jamming or mislabeling. The Avery 1131 uses standard ¾ inch by 7/16 inch labels.

Step 2: Open the Label Gun

To open the label gun, push the button on the side of the gun and lift the cover. This will expose the label roll holder and the ink roller.

Step 3: Insert the Label Roll

Take the label roll and insert it onto the label roll holder. Ensure that the labels are facing up and that the edge of the label roll is flush against the holder. Use the tweezers to thread the label through the feed slot until it appears on the bottom of the gun.

Step 4: Thread the Label

Once the label roll is in place, use the tweezers to thread the label through the guide slot and under the ink roller. Then, pull the label up and insert the end into the label ejection slot.

Step 5: Close the Label Gun

With the label inserted, close the cover and lock it in place by pressing down on both sides. The Avery 1131 label gun should now be ready for use.

Conclusion

In summary, loading the Avery 1131 label gun is a simple process that requires attention to detail and patience. Following these steps can save time and frustration in the long run. Remember, when in doubt, refer to the user manual or seek assistance from a professional. Hopefully, this article has provided enough guidance to load the label gun accurately.