how to replace door gasket on whirlpool front load washer

The door gasket on your Whirlpool front load washer may need to be replaced if it becomes worn or damaged. A faulty gasket can result in water leaking from the machine or clothes not being properly cleaned. This article will guide you through the steps to replace the gasket.

Tools and Materials

Before you start, you will need the following tools and materials:- New door gasket- Pliers- Screwdriver- Wet/dry vacuum- Towel or rag- HammerMake sure you have all of these items before beginning the job.

Removing the Old Gasket

The first step in replacing the door gasket is to remove the old one. Follow these steps:1. Unplug the washer from the electrical outlet.2. Open the door of the washer and locate the clamp that holds the gasket to the machine.3. Use pliers to loosen the clamp and remove it from the gasket.4. Pull the gasket away from the machine, starting at one corner and working your way around.5. If there is excess water in the gasket, use a wet/dry vacuum to suction it out.6. Clean the area where the gasket was attached, removing any debris or residue.

Installing the New Gasket

Now that you have removed the old gasket, it's time to install the new one. Follow these steps:1. Starting at the top of the washer door, tuck the edge of the gasket under the lip on the machine.2. Push the gasket in place all the way around the door, making sure it is properly seated.3. Replace the clamp over the gasket and use pliers to tighten it.4. Test the fit of the gasket by closing the washer door.5. If the gasket is properly installed, there should be no gaps or tears.

Finishing the Job

With the new gasket installed, it's time to finish the job. Follow these steps:1. Plug the washer back into the electrical outlet.2. Run a short cycle with no laundry in the machine to make sure there are no leaks.3. If there is any excess water in the gasket, use a towel or rag to wipe it up.4. Dispose of the old gasket properly.Congratulations, you have successfully replaced the door gasket on your Whirlpool front load washer! Remember to keep the machine properly maintained to prolong its life and avoid future issues.